Pre-Black Friday starts Nov 1: your first Monthly Mystery Box for $19.99

Starts in
See the Mystery Box

New: Monthly Filament Mystery Box plans, $19.99/mo for 3, 6 or 12 months

Black Friday BOGO starts in
Get the Mystery Box

Black Friday: Buy one spool, get one FREE + free shipping over $50Mystery Box first month $14.99

Ends in
Shop filament
Red low-poly 3D-printed heart on a black base

3D Printer Infill Guide: Best Percentage and Pattern for Every Print

3D printer infill is the hidden structure inside almost every part you print, and it has a bigger effect on strength, print time and filament use than most beginners expect. Your slicer fills the inside of a model with a repeating pattern instead of solid plastic, and the two choices you make, infill percentage and infill pattern, decide whether a part comes out light and fast or heavy and tough. This guide explains how 3D printer infill works, which settings to start with for different jobs, and the common mistakes that waste time and spools.

What Is 3D Printer Infill?

When a slicer turns a 3D model into G-code, it splits each layer into three zones. The outer shell is made of walls (also called perimeters), the top and bottom of the part are made of solid skin layers, and everything in between is infill. Infill is usually printed as a lattice, honeycomb or wave pattern that supports the top layers and ties the walls together.

Printing the inside of a part at 100% solid would use a lot of filament and take far longer, and for most objects it adds little useful strength. A well chosen infill gives you most of the stiffness you need at a fraction of the material and time.

Two settings control it:

  • Infill density (a percentage): how much of the interior is filled with plastic. 0% is hollow, 100% is solid.
  • Infill pattern: the shape the slicer draws inside the part, such as grid, gyroid or cubic.

How Much Infill Do You Need?

There is no single correct number, but these ranges are a reliable starting point for PLA, PLA Pro, PETG and ABS on a standard 0.4 mm nozzle.

0% to 10%: Display Models and Vases

Figures, busts, decorative pieces and anything that will sit on a shelf rarely need more than 10% infill. The infill only has to hold up the top surfaces. Very low settings print fast and save the most filament, but they need enough top layers to avoid gaps and sagging on flat tops.

15% to 25%: Everyday Prints

This is the default in most slicers for good reason. Organizers, desk accessories, prototypes for fit checks, cosplay pieces and household parts are well served by 15% to 25%. If you are not sure what to choose, start at 20%.

30% to 50%: Functional Parts

Brackets, clips, hooks, tool holders and parts that get handled or screwed together benefit from 30% to 50% infill. The extra material resists crushing, helps screws bite into the plastic and makes the part feel more solid.

50% to 100%: High Stress and Special Cases

Very high infill makes sense for small, highly loaded parts such as gears, spacers, washers and mounts that take impacts. It also helps when you plan to drill, tap or sand deep into a part. Above about 50%, each extra percent adds a lot of time and filament for a smaller gain in strength, so raise walls first (see below) before jumping to 100%.

Black 3D-printed sphinx bust on a rectangular base, a display print that only needs low infill

Walls Often Matter More Than Infill

Here is the tip that saves the most filament: for many parts, adding walls makes a part stronger than adding infill. When a part bends or twists, most of the stress is carried by the outer surface. Going from 2 walls to 3 or 4 walls often adds more real-world strength than raising infill from 20% to 40%, and it usually costs less print time.

A practical recipe for a strong functional part is 3 to 4 walls, 4 to 5 top and bottom layers, and 25% to 40% infill. Only push infill higher if the part still flexes or cracks in testing. For more on picking materials and settings for tough parts, see our guide on how to choose filament for stronger parts.

Common 3D Printer Infill Patterns Explained

Pattern names vary slightly between Cura, PrusaSlicer, OrcaSlicer and Bambu Studio, but the main options are similar.

Grid and Lines (Rectilinear)

Grid draws crossing lines on each layer, while lines or rectilinear alternate direction from layer to layer. Both are fast and simple and work well for everyday prints. Grid lines cross over each other on the same layer, which can cause the nozzle to bump the infill at higher speeds.

Triangles

Triangles give good stiffness in the flat plane of the print and work well for parts that need a rigid base. Like grid, the lines overlap on each layer.

Cubic and Adaptive Cubic

Cubic builds tilted cubes that stack through the part, giving fairly even strength in all directions. It is a solid all-round choice for functional parts. Adaptive cubic, available in some slicers, uses larger cells in the middle of the part and denser cells near the walls, which saves material.

Gyroid

Gyroid is a smooth, wave-like pattern that changes shape slightly on every layer. It spreads strength evenly in all directions, the lines never cross on the same layer, and many makers find it prints quietly and reliably. It is a popular choice for functional parts and is also common for flexible prints.

Honeycomb

Honeycomb is strong and looks great in translucent parts, but it takes longer to print because the nozzle changes direction constantly.

Lightning

Lightning builds tree-like branches only where they are needed to support top surfaces. It is the fastest way to print display models with flat tops, but it adds almost no strength, so do not use it for parts that carry a load.

Concentric

Concentric follows the outline of the part in rings. It is used for flexible TPU prints and for thin parts where a smooth, even interior matters more than stiffness.

Picking Infill by Material

PLA and PLA Pro

PLA is stiff, so low infill goes a long way for display work. For functional PLA Pro parts, 20% to 40% gyroid or cubic with 3 walls is a dependable recipe. Our UniFilasTech PLA Pro lists 220°C on the nozzle and 40°C on the bed as its starting settings, and infill choices do not change those temperatures.

PETG

PETG is tougher and a bit more flexible than PLA, so the same infill gives a part that bends a little before it breaks. Gyroid works well with PETG because the nozzle does not cross over its own lines on a layer, which helps reduce blobs and nozzle drag.

ABS

ABS shrinks as it cools, and very high infill on large parts adds internal stress that can make warping worse. Stick to 20% to 40% for most ABS parts and add walls for strength. At DDub Tech we print ABS at 255°C, and an enclosure plus good bed adhesion still matters more for warping than any infill setting.

TPU

With flexible TPU, infill controls how soft a part feels. Low infill (10% to 20%) makes a squishy part, while higher infill makes it firmer. Gyroid and concentric are good choices for bumpers, feet and shoe parts. Our guide to TPU vs PLA flexibility covers how flexible filament behaves compared with rigid PLA.

Common Infill Problems and Fixes

Gaps or Bumps on Top Surfaces (Pillowing)

If flat tops look lumpy or show holes, the top layers do not have enough support. Add one or two more top layers, or raise infill by 5% to 10%. Good part cooling also helps the first top layer bridge cleanly.

Infill Shows Through the Walls

If you can see the infill pattern on the side of a part, the walls are too thin or the infill overlap is set too high. Add a wall, and check the infill overlap or infill and wall overlap setting in your slicer.

Weak, Stringy or Broken Infill

Thin, broken infill lines are usually a sign of under-extrusion, often from printing infill faster than the hotend can melt plastic, or from damp filament. Slow the infill speed, confirm your flow is calibrated, and dry or properly store your spools.

Prints Take Too Long

If a simple model is taking hours, drop infill to 10% to 15%, switch to a faster pattern such as lines or lightning for display pieces, or turn on a thicker infill layer height option if your slicer supports it.

Quick Start Settings

  • Display model: 2 walls, 5% to 10% lightning or grid, 4 to 5 top layers.
  • Everyday print: 2 to 3 walls, 15% to 20% grid or gyroid.
  • Functional part: 3 to 4 walls, 25% to 40% gyroid or cubic, 4 to 5 top and bottom layers.
  • High stress small part: 4 or more walls, 50% to 100% infill.
  • Flexible TPU part: 2 to 3 walls, 10% to 30% gyroid or concentric.

Change one setting at a time and print a small test piece before committing to a long job. You will learn more about your printer from three quick test prints than from any chart.

Ready to put these settings to work? Our PLA Pro comes on 1 kg spools of 1.75 mm filament with a ±0.02 mm diameter tolerance in Black, White, Slate Grey, Red and Transparent. Shop now and stock up for your next project.

FAQ

What is the best infill percentage for 3D printing?

For most everyday prints, 15% to 25% is the best balance of strength, speed and filament use. Use 5% to 10% for display models and 30% to 50% for functional parts.

Does more infill make a print stronger?

Yes, but with diminishing returns. Adding walls often gives a bigger strength boost than raising infill, so try 3 to 4 walls before going above 50% infill.

What is the strongest infill pattern?

Patterns such as gyroid, cubic and honeycomb give strong, even support in multiple directions. Gyroid is a popular all-round choice because it prints reliably and spreads loads evenly.

Can I print with 0% infill?

Yes. Vases and some hollow decorative parts print fine at 0% infill, often using vase mode. Parts with flat tops need some infill to support the top layers.

Does infill affect how much filament I use?

Yes. Infill is often a large share of a part’s weight, so dropping from 40% to 20% can noticeably cut filament use and print time. Your slicer shows the estimated filament weight before you print.

RSS
Follow by Email
X
YouTube
Instagram
Snapchat
Tiktok
0