DDUB TECH PRINTING RESOURCES
Get ready for your next print with UniFilasTech material profiles for Bambu Studio, OrcaSlicer, PrusaSlicer, UltiMaker Cura and Creality Print, or use the settings below in your own slicer.
These are starting profiles built on each slicer’s generic material settings plus our recommended temperatures. Run a quick temperature and flow test for your printer. Files have been syntax-checked, but not yet import-tested or print-tested.
All filaments below are 1.75 mm with a listed diameter tolerance of ±0.02 mm. One starting profile per material covers its listed colors. These downloads do not include printer or print-quality presets.
Download the collection
- Bambu Studio collection (ZIP)
- OrcaSlicer collection (ZIP)
- PrusaSlicer collection (ZIP)
- UltiMaker Cura collection (ZIP)
- Creality Print (K1, 0.4 mm) collection (ZIP)
Extract the ZIP first, then import only the file for your slicer. The ZIPs include import notes.
Printer compatibility: Bambu Studio: X1/P1S family; Creality Print: K1 with a 0.4 mm nozzle. For other printers, use the manual method below.
UniFilasTech PLA Pro
1 kg per spool. Colors covered: Red, White, Slate Grey and Transparent.
| Nozzle starting temperature | 220°C |
|---|---|
| Bed starting temperature | 40°C |
One material starting profile covers all listed PLA Pro colors. Black is not included in this initial inventory selection.
Downloads for this filament
UniFilasTech PETG Sky Blue
1 kg per spool. Colors covered: Sky Blue.
| Nozzle starting temperature | 255°C |
|---|---|
| Bed starting temperature | 70°C |
| Enclosure | Usually not needed, according to the product page. |
Check a small test piece for stringing and fine-tune retraction as needed.
Downloads for this filament
UniFilasTech ABS Sky Blue
1 kg per spool. Colors covered: Sky Blue.
| Nozzle starting temperature | 255°C |
|---|---|
| Bed starting temperature | 100°C |
| Enclosure | Recommended. Print in a well-ventilated space. |
Downloads for this filament
UniFilasTech TPU Shoeflex 9075A
750 g per spool. Colors covered: Lake Blue and Nova Orange.
| Nozzle starting temperature | 255°C |
|---|---|
| Bed starting temperature | 35°C |
| Speed and retraction notes | Print slowly and keep retraction low. A direct-drive extruder gives the best results. |
Shore hardness: 90A before printing, 75A after printing. Check that your filament-feed system supports flexible filament. Cura may show a generic “TPU 95A” quality category; the material is still Shoeflex 9075A.
Downloads for this filament
How to import
Back up your presets, extract the ZIP and select your printer and nozzle. Menu names may vary by version.
Bambu Studio
- Choose File → Import → Import Configs (or Import Preset) and open the Bambu Studio .json.
- Select a supported printer/nozzle and the DDub Tech user filament. Review plate temperatures.
OrcaSlicer
- Choose File → Import → Preset Configs (or Import Configs) and open the OrcaSlicer .json.
- Select the DDub Tech material. If its Generic @System parent is missing, update the matching built-in material library.
PrusaSlicer
- Choose File → Import → Import Config Bundle and open the .ini.
- Select the DDub Tech preset under Filament Settings, keeping your own printer and print settings.
UltiMaker Cura
- Open Preferences → Materials → Import and select the .xml.fdm_material file, not the quality-profile import screen.
- Select the material for your 1.75 mm printer and a compatible quality profile. Check first-layer and later-layer temperatures.
Creality Print
- Select the Creality K1, 0.4 mm nozzle printer.
- Choose File → Import → Import Configs and open the Creality Print .json. Select the DDub Tech user filament and check temperatures. Use the manual method for other printers.
Manual method for other printers or slicer versions
- Select your printer/nozzle and duplicate its generic PLA, PETG, ABS or TPU/FLEX material preset.
- Apply the table’s nozzle and bed temperatures to first and later layers. Use a suitable build plate.
- Save as DDub Tech UniFilasTech [material], then test temperature and flow. Fine-tune speed and retraction, especially for Shoeflex.
More filament, more profiles
This library starts with PLA Pro, PETG, ABS and TPU Shoeflex from our shop. We will add more filament sections and downloads as the website selection grows. Check each product page for current colors and availability.
New to DDub Tech? Use WELCOME15 for 15% off your first order.
